What CDM 15?

Do I need CDM regulations?

The Construction (Design and Management) Regulations 2015 (CDM regulations) require that the Health and Safety Executive (HSE) must be notified of any project defined as construction under the regulations where the construction work is likely to last longer than 30 working days and have more than 20 workers working ….

What are CDM requirements?

The Construction (Design & Management) Regulations (CDM 2015) are the main set of regulations for managing the health, safety and welfare of construction projects. CDM applies to all building and construction work and includes new build, demolition, refurbishment, extensions, conversions, repair and maintenance.

Does my project fall under CDM?

CDM 2015 applies to all construction projects, just like CDM 2007 did. That’s right, every construction project. … However, this is no longer the case under CDM 2015. Under CDM 2015, even if your project is non-notifiable, you must still comply with all the CDM duties (other than the duty to notify the HSE).

What is a CDM action plan?

The Construction (Design and Management) Regulations (CDM Regulations) are intended to ensure that health and safety issues are properly considered during a project’s development so that the risk of harm to those who have to build, use and maintain structures is reduced.

Who is the client under CDM?

The client is defined in the CDM regulations as “any person for whom a project is carried out”. This could be a single person, a group of people, even a business. The client is usually the person instructing contractors and designers, and deciding what work will be done.

What does CDM apply to?

CDM 2015 applies to all construction work including domestic projects. As a domestic client your duties under CDM 2015 are passed on to others who are carrying out the construction work on your behalf (such as designers and contractors). Those carrying out the work will also have duties of their own.

Who are the duty holders under CDM 2015?

Duty HoldersPrincipals. Client. Domestic Client. Principal Designer. Principal Contractor.Others. Designer. Contractor.

What is the main aim of CDM regulations?

The purpose of the CDM regulations is to focus the attention of the project team on the health and safety aspects of the project, to improve the planning and management of projects, to facilitate the early identification of hazards, and to place responsibilities and efforts where they can most benefit health and safety …

Does CDM apply if only one contractor?

One of the key duties of the principal contractor is to manage coordination and cooperation between contractors, and ensure they comply with their duties under CDM. As there is only one contractor involved in the project, the management of other contractors is not required.

What are the 5 main parts of CDM?

The guidance content is as follows:Introduction.Part 1 – Commencement, interpretation and application.Part 2 – Client duties.Part 3 – Health & Safety Duties and Roles.Part 4 – General requirements for all construction sites.Part 5 – General.Schedule 1 Particulars to be notified under regulation 6.More items…

CDM 2015 places legal duties on all involved in a construction project; duties which are enforceable by criminal law. … The regulations now apply to all clients of construction projects, whether or not a person is acting in the course or furtherance of a business.

What is a CDM document?

The Construction Phase Plan is required for all projects under CDM 2015 to provide for effective health and safety management during the construction. … Health and Safety File. The Health and Safety File is to be produced on all projects, and is prepared by the Principal Designer.

Who are the CDM duty holders?

CDM Dutyholders* – Who are they? Commercial clients – Organisations or individuals for whom a construction project is carried out that is done as part of a business. Make suitable arrangements for managing a project, including making sure: other dutyholders are appointed as appropriate.

What should be in a CDM Health and Safety file?

As with other CDM documents, the health and safety file should be proportionate to the project….What the health and safety file should containDescription of the works.Location of the site.Project team directory.Subcontractor register.Supplier register.Key dates (e.g. start date, completion date)

What is a principal designer?

A principal designer is a designer who is an organisation or individual (on smaller projects) appointed by the client to take control of the pre-construction phase of any project involving more than one contractor. … plan, manage, monitor and coordinate health and safety in the pre-construction phase.

What is the purpose of CDM 2015?

The Construction (Design and Management) Regulations 2015 Whatever your role in construction, CDM aims to improve health and safety in the industry by helping you to: sensibly plan the work so the risks involved are managed from start to finish. have the right people for the right job at the right time.

What is the role of a CDM Coordinator?

The CDM co-ordinator’s role is to advise the client on matters relating to health and safety during the design process and during the planning phases of construction. The CDM co-ordinator is expected to: … Facilitate good communication between the client, designers and contractors.

What is a CDM notifiable project?

A construction project is notifiable if: It’s scheduled to last longer than 30 working days AND has more than 20 workers working simultaneously; OR. The project exceeds 500 person days.